At2020 How To Set Up

Looking for the best streaming settings for your GoXLR and Audio Technica AT2020? In this commodity, nosotros'll walk you lot through the best settings to use for alive streaming and recording in a variety of environments.

Quick Answer: Use a low threshold noise gate and a standard vocal EQ blueprint if your live stream has background audio. Leave both of these off for talking head videos with no other audio sources. Nosotros recommend moderate pinch and de-esser settings in either case.

• TC Helicon GoXLR: https://currentprice.io/goxlr
• Sound Technica AT2020: https://currentprice.io/at2020

• 

• 

Connect the Audio Technica AT2020 to the GoXLR

We recommend using the XLR input on the GoXLR equally it has a much amend preamp than the headset input. The preamp on the headset jack will non requite you sufficient gain and will not sound anywhere near every bit adept as using a XLR cable with the XLR input.

GoXLR & Sound Technica AT2020 Mic Gain Set up Upwardly

• Open the mic setup window in the GoXLR software
  
• Select the "Condenser" mic type
  This tells the interface to send 48 5 phantom ability to the AT2020, which it needs to function.
  
• Set the gain slider
  Raise the gain slider as you talk into the AT2020 until the meter is peaking in the "good" range. Nosotros institute 38 dB worked for us, but this will vary depending on the natural volume of your voice.
  

GoXLR & Audio Technica AT2020 Noise Gate Gear up

The dissonance gate's job is to remove background noise from the recording. It's an automated manner to mute and unmute your microphone, with the mic just going live when it picks up sound in a higher place a certain volume threshold.

This is usually used to mic a pulsate kit, where you simply desire each mic to activate when the intended drum is struck.

The clicking in and out of the noise gate is noticeable, and then nosotros feel it's best reserved for streams with game noise that will mask these distracting noises.

Hither are our recommended racket gate settings:

• Threshold: -40 dB to -45 dB
  College than this tin sound aggressive and choppy.
  
• Attenuation: fifty% to 75%
  Controls how much the microphone is muted when the gate is closed. fifty% means the volume is cut by half instead of fully muting the mic.
  
• Attack: x ms (default)
  
• Release: 200 ms (default)

GoXLR & Sound Technica AT2020 EQ Settings

People frequently purchase a microphone based on the fashion it sounds. If you're recording a talking caput video with no other audio sources, leave the EQ setting alone and permit the microphone practise its chore.

However, if you're mixing multiple audio sources, you want to give everything its own EQ space in the mix. The following EQ settings will help requite your voice clarity and go on it from competing with other audio sources in your mix.

• 31.5 Hz: -ix
  
• 63 Hz: -3
  
• 125 Hz: 0
  
• 250 Hz: 0
  
• 500 Hz: -2
  
• 1 kHz: 0
  
• 2 kHz: 2
  
• iv kHz: 2
  
• 8 kHz: 0
  
• xvi kHz: -9

GoXLR & Audio Technica AT2020 Compressor Settings

The compressor'southward job is to brand the loudest sounds quieter, and the quietest sounds louder. This narrows the dynamic range of your voice and helps to deliver more predictable audio to your listeners. In very simple terms, information technology'due south like an auto mixer for your microphone.

Our recommended compressor settings for the GoXLR and AT2020 are:

• Threshold: -xv dB
  Pinch will be applied when your microphone exceeds this level.
  
• Ratio: 3.ii:1
  Maintains some of the dynamics and emotion in your phonation.
  
• Attack: 2 ms (default)
  
• Release: 100 ms (default)
  
• Make-up proceeds: 5 dB to 7 dB
  Brings upward the quieter moments in your sound to narrow the dynamic range.

GoXLR & Audio Technica AT2020 De-Esser Prepare

The de-esser does exactly what the proper name suggests; information technology manages the S sounds, pops, clicks, and other mouth noises heard in your voice. By rounding off these sibilant frequencies, your voice is easier to listen to for extended periods on a live stream.

Nosotros recommend a de-esser setting between 40% and 60% and observe that 50% works best for usa.

GoXLR & Audio Technica AT2020 Pricing & Specs

• TC Helicon GoXLR: https://currentprice.io/goxlr
• Sound Technica AT2020: https://currentprice.io/at2020
• Foam Windscreen For AT2020: https://geni.usa/XKG3n5t
• Shockmount for AT2020: https://geni.us/zS69yd
• Beyerdynamic DT 990 Pro: https://currentprice.io/beyer_dt_990
• XLR Cable: https://currentprice.io/xlr_cable
• TRS Cablevision: https://currentprice.io/trs_cable
• Mic Stand up: https://currentprice.io/desk_stand
• Rode PSA1 Smash Arm: https://currentprice.io/boom_arm

GoXLR & Sound Technica AT2020 Setup | All-time Mic Settings Topics

• 0:00 – Introduction
• 0:thirteen – Pricing & Specs
• 0:25 – Equipment Setup
• 0:37 – Connect AT2020 to GoXLR
• 1:00 – AT2020 Gain Setup
• 2:00 – Dissonance Gate Setup
• 4:41 – EQ Setup
• eight:30 – Compressor Setup
• 10:57 – DeEsser Setup
• 11:56 – Setting Overview
• 12:47 – Final Thoughts

Source: https://kettnercreative.com/audio-mixer/goxlr-audio-technica-at2020-setup-best-mic-settings/

Share this post